Обновить wg-easy-install.md

wg-easy-install.md

@@ -0,0 +1,36 @@
+WG-EASY INSTALLATION GUIDE (DOCKER RUN)
+
+1.  Update system: apt update && apt upgrade -y
+
+2.  Install Docker: apt install -y docker.io docker-compose systemctl
+    enable docker systemctl start docker
+
+3.  Open ports (if firewall is enabled): ufw allow 51820/udp ufw allow
+    51821/tcp ufw enable
+
+4.  Run wg-easy container:
+
+docker run -d
+–name=wg-easy
+-e WG_HOST=193.124.57.125
+-e
+PASSWORD_HASH=‘$2a12TXjvDufTG5P4ef6k7M0F..3z7NekUPoHnaNyHnY9XHrSIlxG5nPyO’
+-e WG_DEFAULT_DNS=1.1.1.1,1.0.0.1
+-v /etc/wireguard:/etc/wireguard
+-p 51820:51820/udp
+-p 51821:51821/tcp
+–cap-add=NET_ADMIN
+–cap-add=SYS_MODULE
+–sysctl=“net.ipv4.conf.all.src_valid_mark=1”
+–sysctl=“net.ipv4.ip_forward=1”
+–restart unless-stopped
+ghcr.io/wg-easy/wg-easy
+
+5.  Check logs: docker logs -f wg-easy
+
+6.  Open web interface: http://193.124.57.125:51821
+
+7.  If VPN has no internet: sysctl -w net.ipv4.ip_forward=1 iptables -t
+    nat -A POSTROUTING -o eth0 -j MASQUERADE
+
+Done.