diff --git a/README.md b/README.md
deleted file mode 100644
index bf5b22d..0000000
--- a/README.md
+++ /dev/null
@@ -1,108 +0,0 @@
-# WG-EASY VPN Installation Guide (Docker Run)
-
-## 📌 Overview
-
-This guide explains how to install and run **wg-easy (WireGuard VPN)**
-on a VPS using Docker.
-
-------------------------------------------------------------------------
-
-## ⚙️ 1. Update System
-
-``` bash
-apt update && apt upgrade -y
-```
-
-------------------------------------------------------------------------
-
-## 🐳 2. Install Docker
-
-``` bash
-apt install -y docker.io docker-compose
-systemctl enable docker
-systemctl start docker
-```
-
-Check Docker:
-
-``` bash
-docker --version
-```
-
-------------------------------------------------------------------------
-
-## 🔥 3. Open Required Ports
-
-``` bash
-ufw allow 51820/udp
-ufw allow 51821/tcp
-ufw enable
-```
-
-------------------------------------------------------------------------
-
-## 🚀 4. Run wg-easy
-
-``` bash
-docker run -d \
-  --name=wg-easy \
-  -e WG_HOST=193.124.57.125 \
-  -e PASSWORD_HASH='$2a$12$TXjvDufTG5P4ef6k7M0F..3z7NekUPoHnaNyHnY9XHrSIlxG5nPyO' \
-  -e WG_DEFAULT_DNS=1.1.1.1,1.0.0.1 \
-  -v /etc/wireguard:/etc/wireguard \
-  -p 51820:51820/udp \
-  -p 51821:51821/tcp \
-  --cap-add=NET_ADMIN \
-  --cap-add=SYS_MODULE \
-  --sysctl="net.ipv4.conf.all.src_valid_mark=1" \
-  --sysctl="net.ipv4.ip_forward=1" \
-  --restart unless-stopped \
-  ghcr.io/wg-easy/wg-easy
-```
-
-------------------------------------------------------------------------
-
-## 📊 5. Check Logs
-
-``` bash
-docker logs -f wg-easy
-```
-
-Expected output:
-
-    Server Listening on http://0.0.0.0:51821
-
-------------------------------------------------------------------------
-
-## 🌐 6. Access Web Interface
-
-Open in browser:
-
-    http://193.124.57.125:51821
-
--   Login password = your original password (not the hash)
-
-------------------------------------------------------------------------
-
-## ⚠️ 7. Fix No Internet Issue
-
-If VPN connects but has no internet:
-
-``` bash
-sysctl -w net.ipv4.ip_forward=1
-iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-```
-
-------------------------------------------------------------------------
-
-## 💡 Notes
-
--   Default DNS: Cloudflare (1.1.1.1)
--   Make sure your VPS provider allows UDP traffic
--   Use strong password
-
-------------------------------------------------------------------------
-
-## ✅ Done
-
-Your WireGuard VPN server is now ready 🎉