WG-EASY INSTALLATION GUIDE (DOCKER RUN)

1.  Update system: apt update && apt upgrade -y

2.  Install Docker: apt install -y docker.io docker-compose systemctl
    enable docker systemctl start docker

3.  Open ports (if firewall is enabled): ufw allow 51820/udp ufw allow
    51821/tcp ufw enable

4.  Run wg-easy container:

docker run -d
–name=wg-easy
-e WG_HOST=193.124.57.125
-e
PASSWORD_HASH=‘$2a12TXjvDufTG5P4ef6k7M0F..3z7NekUPoHnaNyHnY9XHrSIlxG5nPyO’
-e WG_DEFAULT_DNS=1.1.1.1,1.0.0.1
-v /etc/wireguard:/etc/wireguard
-p 51820:51820/udp
-p 51821:51821/tcp
–cap-add=NET_ADMIN
–cap-add=SYS_MODULE
–sysctl=“net.ipv4.conf.all.src_valid_mark=1”
–sysctl=“net.ipv4.ip_forward=1”
–restart unless-stopped
ghcr.io/wg-easy/wg-easy

5.  Check logs: docker logs -f wg-easy

6.  Open web interface: http://193.124.57.125:51821

7.  If VPN has no internet: sysctl -w net.ipv4.ip_forward=1 iptables -t
    nat -A POSTROUTING -o eth0 -j MASQUERADE

Done.